mechanic replaced slave cylinder on 92 camaro rs and it lost power, vibrates and sounds terrible now

mechanic replaced slave cylinder on 92 camaro rs and it lost power, vibrates and sounds terrible now 2 Answers

i have a 99 v6 camaro. i recently replaced all the fuses and now the SES light and Reduced Engine Power light came on and the throttle doesnt work. I cant drive it to get it looked at because the throttle doesnt work and im assuming its something simple because it only happened after i replaced all the fuses. how do i fix this? 5 Answers

i have a 99 v6 camaro. i recently replaced all the fuses and now the SES light and Reduced Engine Power light came on and the throttle doesnt work. I cant drive it to get it looked at because the ...

i have a 91 camero rs and the egr valve broke i replaced it and now it won't start 1 Answer

i have a 91 rs camero it was running when i parked it. went out a few days later to start it.got it going then i went bang bang.found out the egr valve broke.i replaced it now the car won't start

I have 1992 Camaro RS and the security light is on and the car wont start how can i dissable and eliminate the system 4 Answers

I replaced burnt out fuses and the security light came on and now the car wont start, how and where can i find the system to eliminate it. If i remove the ECM fuse the light goes off but i cant turn ...

I have 1992 Chevy Camaro RS,put all new break parts on the front axel, it still pulls hard right, and sometimes the pedal is not full . Help 2 Answers

I put all new parts on the frot end, calipers,rotors, and pads. Still is pulling Hard right, sometimes the pedal is full or goes down. Break Line Leak? Also when putting brass rings on the banjo bol...