Sirkut_Interrupted answered 4 years ago
If the module has power then its likely you have a bad crank sensor
Our 2003 buick lesabre will crank but won't start we replaced the camshaft senser and cleaned the plug in it still won't start
My 2001 buick lesabre turns over but wont start no spark to coil pack
2001 Buick LeSabre Custom Sedan FWD
-
Maintenance & Repair
Without warning car just dies. Turns over wont start. Several hours later try again and cranks right up. Week later does same thing. No codes. Hear fuel pump come on. Any ideas??
2002 Buick LeSabre Custom Sedan FWD
-
Maintenance & Repair
This morning I tried to start my car, and it wouldn't start. It cranks for as long as I hold the ignition but doesn't start. No security lights are on, and accessories power on just fine. Also, whe...
2000 Buick LeSabre Custom Sedan FWD
-
Maintenance & Repair
Had a real bad misfire changed the ignition module, coil packs, spark plugs and wires. Two days later car will crank but wont start. Checked all connections and re checked the spark plug gap what...
2005 Buick LeSabre Limited Sedan FWD
-
Maintenance & Repair
The car starting dyeing w/o warning. Now it will turn over but wont start. 93 buick lesabre
1993 Buick LeSabre
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.