Asked by mjhoppe5 Aug 25, 2014 at 04:28 PM about the 2004 Chrysler Town & Country Touring LWB FWD
Question type: Maintenance & Repair
'04 T&C 3.8. NEW PLUGS,WIRES,PULLED INTAKE,CHECKED INJECTORS,OKAY, I
AM LEANING TOWARDS VACUUM OR MAP SENSOR UNPLUGGED MAP HARNESS
SLIGHT CHANGE BUT VERY LITTLE
'04 T&C 3.8. NEW PLUGS,WIRES,PULLED INTAKE,CHECKED INJECTORS,OKAY, I AM LEANING TOWARDS VACUUM OR MAP SENSOR UNPLUGGED MAP HARNESS SLIGHT CHANGE BUT VERY LITTLE
2004 Chrysler Town & Country Touring LWB FWD
-
Maintenance & Repair
I've changed plugs, wires coil, and fuel injector on cyl 5 and the trouble code returned for the misfire on cyl 5 again. What else is there other than the ecm or pcm?
2004 Chrysler Town & Country Limited LWB FWD
-
Maintenance & Repair
My 09 town n country 4.0 only misfires if you restart after you driven for awhile. Like if you have to run into the store real quick. Have a code misfire #4 changed the plug n coil cleared code n ...
2009 Chrysler Town & Country Limited FWD
-
Maintenance & Repair
My husband changed all spark plugs and spark plug wires and now there is a severe misfire with the van. The plugs that were in the van were really bad. What do you all suggest our next steps to be?
2010 Chrysler Town & Country Touring FWD
-
Maintenance & Repair
Have to turn it over few times before it starts bit it will stay running just really rough
2002 Chrysler Town & Country
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.