96 Chevy Suburban cam sensor and mass air flow sensor
I replace the mass airflow sensor and the
camshaft sensor on my 96 5.7 L Chevy Suburban
code still pop up and I still have the exact same
problem I also replace the connector on the mass
air flow sensor nothing has changed check engine
light on truck fires up fluctuates on idle dies if
Feathering and holding the gas it will stay running
once running it runs fine so shut off then same
problem code keeps popping up first code
becomes in mass air flow sensor low something or
other and camshaft sensor but these are brand
new can anybody help me
What are the codes?
P0102 mass or volume air flow sensor a circuit low and P0340 camshaft position sensor a circuit bank 1 or single sensor replaced both camshaft sensor and mass air flow sensor
You have a bad ground for the air flow meter,check the black/white wire for a break.
I was thinking that myself so I cut about an inch off of the old plug-in installed a brand new plug with pins just to make sure I had solid connection
Where does the mass airflow sensor ground go once it goes into the harness do you know by any chance maybe I'll track back further
Are the camshaft sensor and mass airflow sensor on the same ground
Probably to a engine block ground,where,not sure.
Looking for a Used Suburban in your area?
CarGurus has 718 nationwide Suburban listings starting at $5,495.
Search Chevrolet Suburban Questions
Chevrolet Suburban Experts
Related Models For Sale
Used Cars for Sale