I have a 1997 Chevy S10 Blazer, and I can't get the turn signals or brake lights to work. I've tested the bulbs, and replaced the fuzes, what do I do?

Asked by PhilB420 May 18, 2015 at 02:47 PM about the 1997 Chevrolet Blazer LT 4-Door 4WD

Question type: Maintenance & Repair

The tail lights work, but I can't get
turn signals or brake lights. The fuzes
are brand new, and every light in the
rear lights up.

17,705

CamaroCollector answered 8 years ago

The multi function switch in the column may be the problem

Mark helpful

Your Answer:

I have a 1997 Chevy S10 Blazer, and I can't get the turn signals or brake lights to work. I've tested the bulbs, and replaced the fuzes, what do I do? 1 Answer

The tail lights work, but I can't get turn signals or brake lights. The fuzes are brand new, and every light in the rear lights up.

1997 Chevrolet Blazer LT 4-Door 4WD

-

Maintenance & Repair
I have a 1999 s10 blazer 4.3 the motor blew up and I put a 2001 4.3 I back in but the knock sensor are different what can I do ? 3 Answers

I have 1999 s10 blazer 4.3 blew up I put a 2001 4.3 back in the knock sensor are different what can I do ??

1999 Chevrolet Blazer 4-Door 4WD

-

Maintenance & Repair
Where is the starter in a 1999 4-door Chevy Blazer and how do I test to find out if it needs to be replaced? 5 Answers

When trying to start my 1999 Blazer it only makes clicking sounds and won't start. I have checked the fuses (seem okay), Charged the battery and tried the lights and wipers - they seem to work fine an...

1999 Chevrolet Blazer

-

Maintenance & Repair
i have a 1997 blazer thaT THE REAR WASHER IS NOT WORKING, I REPLACED THE WIPER MOTOR BUT THE WASHER DOES NOT SPRAY WHAT CAN I DO TO FIX THE PROBLEM 4 Answers

THE REAR WASHER NOT WORKING IN MY WIFE'S 1997 S-10 BLAZER. HOW CAN I FIX IT?

1997 Chevrolet Blazer LS 4-Door RWD

-

Maintenance & Repair
I have a 1999 Chevy Blazer, 4x4, 4.3 vortec. We have changed the coil pack, fuel filter, distributor cap and button, the crank shaft sensor, cam sensor and plug wires as well as the ignition control module. We coming to a stop sign it will stall and sometimes when just sitting still. Sometimes it will start right back up and other times it takes several tries. I also have the oxygen sensor on order and it should be here tomorrow. Fuel pressure tested perfectly. No black smoke, no smell of rotten eggs or the cat glowing red. The only code that comes up is PO420. 4 Answers

I have a 1999 Chevy Blazer, 4x4, 4.3 vortec. We have changed the coil pack, fuel filter, distributor cap and button, the crank shaft sensor, cam sensor and plug wires as well as the ignition control m...

1999 Chevrolet Blazer 4-Door 4WD

-

Maintenance & Repair

Used Chevrolet Tahoe

11 Great Deals out of 832 listings starting at $9,980

Used Jeep Grand Cherokee

114 Great Deals out of 3,641 listings starting at $5,555

Used Ford Explorer

61 Great Deals out of 2,048 listings starting at $6,990

Used Toyota 4Runner

23 Great Deals out of 545 listings starting at $12,999

Used Jeep Wrangler

142 Great Deals out of 5,984 listings starting at $6,500

Used Toyota RAV4

127 Great Deals out of 3,065 listings starting at $4,999

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.

I have a 1997 Chevy S10 Blazer, and I can't get the turn signals or brake lights to work. I've tested the bulbs, and replaced the fuzes, what do I do?

1 Answer

Your Answer:

Shortcuts

Search Chevrolet Blazer Questions

CarGurus Experts

Find great deals from top-rated dealers

Related Models For Sale

I have a 1997 Chevy S10 Blazer, and I can't get the turn signals or brake lights to work. I've tested the bulbs, and replaced the fuzes, what do I do?

1 Answer

Your Answer:

Related Questions