Put a mass air flow, it had been working, now it wont. Think it could be electrical, or in ignition switch, not sure

Put a mass air flow, it had been working, now it wont. Think it could be electrical, or in ignition switch, not sure 1 Answer

my 2004 chevy blazer started stalling out,codes read mass air flow senser. so I got a new one but it still wont run. anybody know what it could be? 1 Answer

trying to figure out what the problem is on my blazer and hoe to resolve it

Put in a new transmission it cranks but wont start 1 Answer

I put in a newly rebuilt transmission the truck only sat maybe 3 weeks without atarting now it cranks but wont start

1996 Chevy Blazer LS 4 door 4.3L vortec engine we were driving down the road and it was working good. Then I hear something pop in the front end. Right after that it got real rough skipping till we stoped at a light and it shut off. It will turnover but will not crank. We have changed the fuel pump sensor. Also the ignition control module has been changed 2 Answers

SUV was driving it and I heard a pop sound in the front some where. it started to skip really bad and shut off and has not cranked since, We have changed the fuel pump module or whatever it is calle...

1999 chevy blazer will not start i did a full tune up and change the fuel pump still will not start up all it does is crank i was told it could be the computer i got one put it in still will not start 1 Answer

I put one i had from a 1996 blazer and start up and runs but it runs like crap and my dash bored looks like a Christmas tree