Hornet_2497 answered 5 years ago
I'm not sure but sensor voltages on newer cars is 5 volts, use to be 8 volts, but no longer 12 volts like before computerized engine management systems. If there is a problem with oil pressure, install a mechanical gauge or just replace the sensor. That's probably what's wrong if engine is not clicking/knocking from lack of oil pressure. Check oil level first. Dirty oil filter?
Hi All, I have a 2006 VW GTI that I bought used in NZ with 66,000kms on it. I've only had the car for two months and they did an oil change and full top up when I bought the car. Passed through mecha...
2006 Volkswagen Golf GTI 2.0T 2-Door FWD
-
Maintenance & Repair
what is the voltage at ops pig tail supposed to be
2006 Volkswagen Golf GTI 2.0T 2-Door FWD
-
Maintenance & Repair
The "Low oil pressure" warning on my Jetta GTI comes on at what seems like random times. The oil level is fine and clean. Trying to replace the oil pressure sensor.
2006 Volkswagen Golf GTI 2.0T 2-Door FWD
-
Maintenance & Repair
I think I over filled my oil just now. TThe check engine light is on and it's smoking
2013 Volkswagen Golf GTI
-
Maintenance & Repair
Have reduced oil level back to the correct level after overfilling,engine managment light is still on will this go out or do i have to get it plugged into a diagnostic machine?
2006 Volkswagen Golf GTI 2.0T 2-Door FWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.