Make sure transfer case is engaged... Hi or Low doesn't matter. If that doesn't help, either bad trans, transfer case, drive shaft broken, broken diff or axle. Could be a lot of things.
MrBaffelator answered 4 years ago
If it's a manual transmission could be the hydraulic assist slave cylinder for the clutch.. You didn't give much information.... auto trans/manual... etc.. etc
Transmission went out and need to know if a 1500 will work in a 2500 5.7 hemi magnum
2003 Dodge RAM 2500 SLT Quad Cab 4WD
-
Maintenance & Repair
2001 Dodge Ram 2500 I back into my garage port because there is a grassy slope to the road I gradually noticed after the truck has set for 24 hrs or more that it was taking more rpm/gas to start rolli...
2001 Dodge RAM 2500 SLT Plus Quad Cab 4WD
-
Maintenance & Repair
I have a 99 dodge cummins with auto transmission. I had it built about 20,000 miles ago. When I first start it, it will not shift into second. Once it does finely shift 1/4 mile to 10 miles, it wil...
1999 Dodge RAM 2500 ST Quad Cab LB RWD
-
Maintenance & Repair
I have a 1996 Dodge ram 2500 4X4 with a 5.9 L ( 360 ) 4 speed automatic and trying to find out what transmission i have to get a build kit for it.
1996 Dodge RAM 2500 Laramie SLT Club Cab RWD
-
Maintenance & Repair
I have a 2006 Ram 2500 4x4 with a 5.7 hemi and RFE 545 transmission. I have been having tranny issues where I have had the transmission rebuilt 4 times and then the 5th time a completely differe...
2006 Dodge RAM 2500 SLT Quad Cab 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.