squeaking from the drivers side front

Asked by beej1578 Aug 06, 2015 at 07:33 PM about the 2006 Dodge RAM 1500 SLT Quad Cab LB 4WD

Question type: Maintenance & Repair

squeaks over bumps. Can also stand on the step bar and rock it to get the same noise

8 Answers

64,500

Sounds like the upper and lower control arm bushings needs some lubricant spray WD40 around and into bushings also maybe ball joints need greasing.

7 people found this helpful.
12,595

Where are the step bars mounted? Many mount to the body mount. there is not a lot of room there, and if the bracket is not properly positioned, it will rub the frame and cause a similar noise.

3 people found this helpful.
140

No that is not the answer I believe the answer is your upper strut mount usually it happens when the strut bolt It’s not tight enough I am having the same problem took my to The dealer and they did not did a good job it was under warranty I’ve been working at Cars Since I was 13 years old I am not a certified mechanic but I know a lot about cars you need to check your upper strut mount and strut to see if it’s still good and if They they are make sure you compress the coil springs down enough to where you can tighten the upper strut bolts to the mount to torque specs And after tiny more quarter turn for half turn more. you may have to replace parts if they look worn. Use Loctite For now I would let the dealer deal with my vehicle since it’s still under warranty but I won’t have to tell them what to do like I always do I would recommend you to get a better quality strut mount than the original part that truck comes with

14 people found this helpful.
50

Squeaky front end...replaced lower ball joint and control arm/upper ball joint assembly. Greased the hell outta everything and still squeaky. Tie rod good (in n outl) Im gonna lose my mind.

5 people found this helpful.
50

The front end of my 1500 squeaks over every little dip or bump I heard a lot about lubricating bushings and greasing ball joints is WD40 the best lubricant to use and what kind of grease to use on ball joints

5 people found this helpful.
30

I had issue with top shock mount on 1500 after replacing with Bilstein. I didn’t get the top nut tight enough. After 2+ years it wore out the washer and punched through mounting hole. Replaced shock and mount, made sure to get it properly seated and torqued this time. Lesson learned.

3 people found this helpful.

Your Answer:

RAM 1500

Looking for a Used RAM 1500 in your area?

CarGurus has 93 nationwide RAM 1500 listings starting at $8,999.

Postal Code:

CarGurus Experts

  • #1
    Dan Connell
    Reputation
    19,850
  • #2
    dandyoun
    Reputation
    15,170
  • #3
    Gene Arnett
    Reputation
    11,710
View All

Find great deals from top-rated dealers

Search

Related Models For Sale

Used Ford F-150
318 Great Deals out of 13,660 listings starting at $3,800
Used Chevrolet Silverado 1500
212 Great Deals out of 8,092 listings starting at $6,995
Used GMC Sierra 1500
140 Great Deals out of 8,304 listings starting at $5,500
Used Dodge RAM 2500
28 listings starting at $9,900
Used Toyota Tundra
30 Great Deals out of 978 listings starting at $9,992
Used Dodge Charger
26 Great Deals out of 879 listings starting at $5,495
Used Toyota Tacoma
46 Great Deals out of 728 listings starting at $8,995
Used Jeep Grand Cherokee
124 Great Deals out of 3,505 listings starting at $4,950
Used Dodge Durango
51 Great Deals out of 1,870 listings starting at $6,987
Used Chevrolet Silverado 2500HD
24 Great Deals out of 1,701 listings starting at $8,999
Used Ford Mustang
46 Great Deals out of 1,664 listings starting at $5,977
Used Jeep Wrangler
127 Great Deals out of 5,924 listings starting at $6,500

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.