beatupchevy answered 6 years ago
see if injectors are firing normally , if you smell gas purge the fuel rail and see if it starts , or hold your foot to the floor
Had to put foot to the floor with old injectors but would start right up and run decent. And it would start back when you shut it off.
My 2003 Chevy s10 4.3 v6 lil gauge is rising and falling with the rpm gauge
2003 Chevrolet S-10
-
Maintenance & Repair
Put spider injectors and plugs in my truck. Started right up and ran decent but straightened out and ran smooth. It suddenly shut off and won’t start back.
1997 Chevrolet S-10 LS Extended Cab 4WD
-
Maintenance & Repair
I have a 1997 S10 with a 4.3 engine. It has a code P0300 random misfire on it. I have change about everything on it and still has the code and misfires and backfires. Spark plugs, timing chain and ge...
1997 Chevrolet S-10 LS Extended Cab RWD
-
Maintenance & Repair
i have a 1994 chevy s10 zr2 4.3 tbi, it will shift into 4wd Lo but not 4wd Hi
1994 Chevrolet S-10 4WD
-
Maintenance & Repair
I have a Chevy S10 1993 V6 4.3 liter codes read 12 + 43 I'm changing the distributor today because when I looked at the old one wires were fried I'm also changing knock sensor on left side of the ...
1993 Chevrolet S-10 Tahoe Extended Cab RWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.