Make sure battery has a full charge. Any applicable trouble codes? I saw what you replaced, what testing have you done? Have a helper crank it while you check for spark at the plugs. If spark everywhere, use a gage and check proper fuel pressure and fuel injector pulse. Any electrical component, you need to check wiring circuits, before replacing. Just my opinion.
Just cranks.was running turned off now just cranks. Replaced coil, fuel pump, crank sensor, ignition module, distributor and button. Still just cranks
2001 Chevrolet Blazer LT 4-Door 4WD
-
Maintenance & Repair
I have a 1999 Chevy Blazer, 4x4, 4.3 vortec. We have changed the coil pack, fuel filter, distributor cap and button, the crank shaft sensor, cam sensor and plug wires as well as the ignition control m...
1999 Chevrolet Blazer 4-Door 4WD
-
Maintenance & Repair
SUV was driving it and I heard a pop sound in the front some where. it started to skip really bad and shut off and has not cranked since, We have changed the fuel pump module or whatever it is calle...
1996 Chevrolet Blazer LS 4-Door 4WD
-
Maintenance & Repair
I have a 2001 Chevy blazer, and I have replaced the ignition coil, icm, spark plugs, wires, entire distributor and a new cap and rotor along with that, crankshaft sensor, and it still won’t start. ...
2001 Chevrolet Blazer LS 2-Door RWD
-
Maintenance & Repair
I have a 1997 Chevy Blazer, with the v6. Just changed distributor cap and rotor because it didn't want to fire when it rained. Now it does fire and runs great, but, if it sits long enough to cool,...
1997 Chevrolet Blazer 2-Door RWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.