Is there a trick to disconnecting the electrical connection on an O2 sensor? (2000 tundra)
Can't get the electrical connection to come apart. Any suggestions?
Asked by RicksTundra Mar 17, 2016 at 10:47 AM about the 2000 Toyota Tundra Limited 4 Door Extended Cab 4WD
Question type: Maintenance & Repair
Can't get the electrical connection to come apart. Any suggestions?
Usually there is a clip that keeps the two parts together. Most release when the clip is bent away from the connector. If you cannot find it, and are thoroughly frustrated, the old trick is to cut out the connector and splice the wires directly together. Just remember you did this the next time you need to replace it!
Can't get the electrical connection to come apart. Any suggestions?
2000 Toyota Tundra Limited 4 Door Extended Cab 4WD
-
Maintenance & Repair
I'm replacing front rotors and pads of my 2001 Toyota Tundra. I got the wrong size pads from the shop, had to put it all back together to exchange the parts. No problem. Now that I have the correct si...
2001 Toyota Tundra V8 SR5 4 Door Extended Cab 4WD
-
Maintenance & Repair
where is the starter on a 2007 tundra 5.7L V8
2007 Toyota Tundra Double Cab
-
Maintenance & Repair
Where is the PO161 sensor located on a 2000 tundra. 4.7 V8
2000 Toyota Tundra
-
Maintenance & Repair
I replaced the 02 sensor bank 2 sensor 1 and it still sets code
2000 Toyota Tundra
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.