trans axle solenoid change

Asked by Zane May 13, 2017 at 11:37 AM about the 2006 Chevrolet Uplander LS FWD

Question type: Maintenance & Repair

YES I changed 5 solenoids 206
uplander,and it goes in reverse no
problem,but will not go forward,had a
scanner it picked up no codes,only oil
change,anybody have any ideas on how to
fix the issue,or had the same
problem,accepting all comments,thanks in
advance?

1 Answer
7,455

Brian answered 6 years ago

My thoughts are more on the mechanical side such as forward clutch, internal issue. Hope I am wrong. Did you try cycling between drive/park - Reverse and drive already? Sometimes there is a relearn procedure for TA's Also basic scanners will not always show hidden codes stored and would need a vehicle specific scanner i.e for Chevy or other manufacturer. Some transmissions may need to have the PCM software loaded for transmission calibration files. With all this I assume you properly seated all the solenoids, harness wiring was in good shape/no breaks and the fluid level is at proper level when hot. As a last ditch effort unplug the battery and give it another shot but I still think this is a mechanical problem. Good Luck!

Mark helpful

Your Answer:

Related Questions

  • trans axle solenoid change 1 Answer

    YES I changed 5 solenoids 206 uplander,and it goes in reverse no problem,but will not go forward,had a scanner it picked up no codes,only oil change,anybody have any ideas on how to fix the issue...

    2006 Chevrolet Uplander LS FWD

    -

    Maintenance & Repair

  • chevy uplander trans issue 1 Answer

    My dad has a 2008 chevy uplander that is pushing oil out of the breather on the trans. does that mean that the trans is shot or could it be the torque converter. it seems to shift fine but is pushin...

    Chevrolet Uplander

    -

    Maintenance & Repair

  • 2007 chevy uplander how do I change gears when shift cable is broken? 1 Answer

    2007 Chevrolet Uplander 1LT Extended FWD

    -

    Maintenance & Repair

  • Just had oil change...they told me my AUTOMATIC LEVEL CONTROL (ALC) SYSTEM is unplugged 1 Answer

    I am not sure how it is unplugged, but I am wondering if it is simple, just plug it back in? I do hear the compressor run for 5 seconds when I start the car. And the air compressor in the back to inf...

    2005 Chevrolet Uplander Extended FWD

    -

    Maintenance & Repair

  • Low oil pressure light and chime won’t stop. 4 Answers

    Had my oil pressure sensor changed 2 months ago. Last week had an oil change and the light and chime came back on. Changed a second sensor next day light and chime came back on. They won’t go off ...

    2007 Chevrolet Uplander 1LT Extended FWD

    -

    Maintenance & Repair

Shortcuts

Search Chevrolet Uplander Questions

CarGurus Experts

  • #1
    Kelly Mayo
    Reputation
    750
  • #2
    John Leone
    Reputation
    650
  • #3
    GuruDTVT
    Reputation
    620
View All

Find great deals from top-rated dealers

Search

Related Models For Sale

Used Chevrolet Malibu
54 Great Deals out of 1,065 listings starting at $2,495
Used Toyota Sienna
45 Great Deals out of 611 listings starting at $2,499

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.