blinker issues
Hello i have replace the left back and front bulbs,front wont turn on and back blinks fast,i
also checked the fuses ,need help please.
change all bulbs and flasher..if not any better.check turn sig.switch...
I would clean all the sockets with a burnishing tool. Also, mixing bulbs with different ratings, such as standard or heavy duty, can cause the fast blinking issue. Good luck.
The socket contacts should be cleaned. There are little contact nubs. These should be wiped clean, burnished, and then add just a touch of lithium white grease on the nub. Aslo, ensure all bulbs are of the same and recommended duty rating.
This is the part you need
It's too expensive but if you want rolling lights. It's easier to put a manual switch for it and just toggle the S.O.B.
