Spare key
Asked by Kaylor Oct 17, 2017 at 06:50 PM about the 2003 Pontiac Grand Prix GT
Question type: Car Customization
I had a spare key made and it looks exactly like my
original. The spare opens my doors and trunk.
When i try to turn the car on the engine starts then
stops after like 10 seconds
6 Answers
Good news ... your anti-theft system is working /// now you need at least 1 good working key to program the replacement key you had cut .... if you don't have a working key then a locksmith or dealer can help
I have a working key. Would you happen to have a video link to how i can program the replacement?
beatupchevy answered 6 years ago
you can look for a lock smith but you'll end up at the dealer ship . They could cut the key from the VIN # and then they would program the transponder . Mine was only $22** , don't fear the dealer .
Enter your car and insert your key into the ignition. Cycle the key in the ignition to the "On" position and leave it in that position for 10 minutes and 30 seconds. Cycle the key back "Off" within 45 seconds. Repeat Steps 2 and 3 two more times, and then cycle the key back to the "On" position. Hold the key in the "On" position for five seconds, and use the key to start the car to end the process.
Duh... I thought some cars needed a good key but Pontiac is not one of them
When i repeat steps 2 &3 do i have to wait 10 minutes 2 more times ?
