I have 2004 Pontiac Grand am 3.4L 6 cylinder and the front wheel bearings need replacement. Does my car have press in bearings or NO. Also do the back need to be pressed in or NO. PLEASE ANSWER ASAP.

I have 2004 Pontiac Grand am 3.4L 6 cylinder and the front wheel bearings need replacement. Does my car have press in bearings or NO. Also do the back need to be pressed in or NO. PLEASE ANSWER ASAP. 2 Answers

need specs to repair front wheel bearings and hub assembly for 1994 Grand Am SE V6 3.1 Litre Engine 1 Answer

I need to repair the front wheel bearings on my 1994 Grand Am SE 4 DR. It possibly could be an LE if they made those that year. the motor is a V^ 3.1 Litre..please help...

I have a 99 pontiac grand am se 3.4L V6. The issue is that it starts and idles fine but as soon as I go to accelerate it just shuts off. It did have overheating issues but right after I fixed those it started doing this. I replaced the cam position sensor and also the engine coolant temp sensor and it didnt help. I was thinking of replacing the ignition coil packs and housi g but not sure if that would fix it. There are no check engine lights or stored codes . 4 Answers

I have a 99 pontiac grand am se 3.4L V6. The issue is that it starts and idles fine but as soon as I go to accelerate it just shuts off. It did have overheating issues but right after I fixed those...

I have a 1998 grand am with a leaking slave cylinder. Will this motor come out with a manual tranny or do I need to drop the subframe? 1 Answer

Im getting ready to do this in a couple days and Im hearing differing opinions on whether or not I can do this job without dropping the tranny. I want to do a water pump at the same time so Im wonde...

Why does my Grand Am sitting at a light starts to vibrate when I have the brake press down 3 Answers

I have a brand new tune up new wires new plugs 1 motor mount was replaced and still when I sit at a stoplight with the brake pressed down the engine starts vibrating or the whole car starts vibrati...