One would only be guessing but it is in the front end suspension, worn tie rod ends, struts, ball joints, it just has to be looked at to see what the problem is.
It could also be a CV joint on one of the front axles. Just guessing here also.
When I make a right turn I can hear what seems to be a nocking noise. How and what to do to fix.
2001 Pontiac Grand Am SE
-
Maintenance & Repair
I have replaced the flasher and multi funtion swicth and the directional still only works when the key is on and the engine is not running. Once the air temp in the car is hot enough the directional ...
2005 Pontiac Grand Am
-
Maintenance & Repair
idk if a 4 cylender has 5 gears or not im dumb with cars lol but it feels like it skips a gear when shifting up because as im going it will go up to 2cd while im accelerating its like theres no 4th i...
2001 Pontiac Grand Am SE1
-
Maintenance & Repair
The bolt that holds the tensioner pulley into the engine block keeps coming out and my belt and pulley fall off! Is it possible that the bolt is the wrong size or maybe the threads inside the block ...
2001 Pontiac Grand Am GT1
-
Maintenance & Repair
I have a 2000 Grand Am GT 3.4L that seems to grab and slip at around 40-70mph when i try to increase power. It's hard to diagnose because i have no other issues, (fluid looks good, shifts good) but ...
2000 Pontiac Grand Am GT
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.