Hi i have a 2005 grand cherokee Laredo 4.7 v8 and a msg is saying service 4wd system and it wont go into 4low other than that it drives fine but i would like to see if any one might know what this could be.any ifo would be firstname.lastname@example.org
service 4wd and wont go into 4low but it drives fine
has any one had this problem or know wgat it could be
hey man is it a push button if so it could b a sensor problem my dad had a problem with his 03 chevy tahoes sensor and it wouldn't go out of for low
Here's the same problem with the same '05 Cherokee from five years ago. It mentions a few different scenarios - http://www.cargurus.com/Cars/Discussion-t15926_ds358215
There is a technical service bulletin out for this issue. Take it to a 5-star dealer and they will know what to do. The TSB says the light comes on when there are no faults found. The dealer will need to downlaod the new software for the Final Drive Control Module so the light stops coming on erroneously. Here is the TSB: http://www.wkjeeps.com/tsb/tsb_wk_2101406a.pdf
Wish I had known about the bulletin because I paid $150.00 to reprogram or update all of the firmware on my 2005 grand cherokee limited to stop the airbag light and the service 4wd system message to stop coming on. Now it will not go into 4wd low. Brings up the message to service 4wd system again. Hoping just an actuator? Make any since? Definitely scared of the newer jeeps with all of their new electronics because that and the starter on this one have been the major issues. Along with the constant alignments and the fact that I should just pour the gas on the ground because it doesn't stay in the tank for more than a day. Not complaining just in love but its killing me.