Code p1764 governor sensor

Asked by Feb 11, 2017 at 07:08 AM about the 2004 Jeep Grand Cherokee Laredo 4WD

Question type: Maintenance & Repair

Going insaaaane! I have a 2004 grand cherokee and check
engine came on. Code is p1764 which is the governor
sensor. Now from what I read thats actually called the
transducer.  BUT most videos for it people were also
changing the solenoid. SO i order both and chamged both.
Light was still on. I thought a part was bad so i started over
changing 1 at a time. (This is a pain as you have to drain
tranny fluid every time)  all said and done putting a new
solenoid and keeping the original transducer fixed the
problem and light went of. I went to autozone and had them
hookbup the code reader to check and they said nothing
showing.  2 weeks later BAM!! its back! Shoot me or help
me please. Could something else be killing the solenoid??
Could it be the transducer even though that wasn't the
problem the first time and what are the chances 2 weeks
later its that? Its just a real pain to open the trans pan and
drain it multiple times for trial and error like you could use
with other jobs (and its 15 degrees out right now) so any
help before I start would be so appreciated guys thanks!

3 Answers

73,035

You may have to visit a transmission shop.

First there is a traduced and governor pressure. I personally have issue I replaced 3 times had computerrepaired only to have code come back on. They are two sensors next to one another you always replace both. Anyways I am now at a loss. Replaced sensors 3 times had computer repaired now damn code is back and no one can tell me why at a light after car driven for 30 mins when u stop at red light you get hard shift cause not in first and sluggish take off? I can manually go 1 st 2 no to drive and fine. So mean less to say I have had enough as the same part went out two yrs ago. It's a jeep thing and I won't buy another jeep. Transmission and computers every couple yrs. my 1998 and now the 2003 same damn issues

I went to tranny shop they charged 600 for two visits and yep code still there. I personally being the driver think there is a wiring issue to the plug itself. I am not a mech and apparently neither is tranny specialist

Your Answer

Add photo

Related Questions

Grand Cherokee

Looking for a Used Grand Cherokee in your area?

CarGurus has 2,762 nationwide Grand Cherokee listings starting at $1,871.

Postal Code:

Search Jeep Grand Cherokee Questions

Jeep Grand Cherokee Experts

#1 inuevafreak
inuevafreak
Reputation 2,110
#2 Tom Demyan
Tom Demyan
Reputation 1,890
#3 thejeepdoctor
thejeepdoctor
Reputation 1,780
View All

Related Models For Sale

Used Ford Explorer
49 Great Deals out of 1,373 listings starting at $3,900
Used Jeep Wrangler
82 Great Deals out of 1,533 listings starting at $2,488
Used Toyota 4Runner
8 Great Deals out of 429 listings starting at $5,000
Used Dodge Durango
62 Great Deals out of 1,038 listings starting at $2,998
Used Chevrolet Tahoe
7 Great Deals out of 618 listings starting at $6,871
Used Ford F-150
427 Great Deals out of 9,029 listings starting at $922
Used Chevrolet Silverado 1500
164 Great Deals out of 10,494 listings starting at $100
Used BMW X5
31 Great Deals out of 740 listings starting at $4,000
Used Ford Mustang
9 Great Deals out of 1,205 listings starting at $2,995

Used Cars For Sale

2018 Jeep Grand Cherokee Laredo 4WD For Sale
5 listings starting at $46,440
2017 Jeep Grand Cherokee Laredo 4WD For Sale
7 Great Deals out of 212 listings starting at $29,507
2016 Jeep Grand Cherokee Laredo 4WD For Sale
40 listings starting at $27,800
2015 Jeep Grand Cherokee Laredo 4WD For Sale
9 Great Deals out of 59 listings starting at $24,888
2014 Jeep Grand Cherokee Laredo 4WD For Sale
33 listings starting at $17,490

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.