99/2000 jeep grand cherokee Engine light stuck on !! PLZ HELP
Asked by Lorraine Oct 28, 2014 at 09:54 PM about the 2000 Jeep Grand Cherokee Limited 4WD
Question type: Maintenance & Repair
i have a jeep grand cherokee 99/2000 i have problem with engine light stuck on ! its
codes read p0130 p0135 p0150 i have replaced them but its still stuck on i replaced
the crank angle sensors aswel i replaced timing chain was stretched but it still coming
up with O2 sensors that have been replaced !!! SOMEONE PLZ HELP I've spent way to
much cash on her already !!!!!
9 Answers
Have you unhooked battery and let it set for 30 minute,s to reset the light?
Some time,s the ecm will hold the code,s,,you need to have some one with scanner clear them.
they said they have tried to clears codes but it comes back up ! Whats ECM ? sorry !
It,s the ecu all so,electronic control unit,or electronic control module,in other word,s the brain.
If code,s do not clear, there is still and issue,or the ecu is bad,and giving false code,s.
Took the car to Jeep had all codes cleared, then the engine light went off, stayed off for approx 5 min then came back on. Someone suggested to take the ECU to someone to see if it is faulty.
im having the same problem , replaced the ECU , and the light came back on after 5 miles of driving , yes it was flashed yo my jeep , when the light comes on it runs rough and stalls out WHEN IT WANTS TOO , HELP !!!
