2004 Hyundai Santa Fe won't start after fueling
I have read may forums with folks that have this same issue and all stated purge valve replacement. Well my vapor canister and purge valve have been replace, gas cap has been replaced, crank shaft sensor has been replaced and several other things and I still have this issue and now have engine run on and it has started to loose power upon acceleration (occasionally) I have sunk a stupid amount of money into this vehicle and really need to find out what is wrong...any help is appreciated !
Take Off The Negative Batter Terminal For 45 Minutes To Reset The ECM(ECU). See if your vehicle will start after that. An octane rating, or octane number, is a standard measure of the performance of an engine or aviation fuel. The higher the octane number, the more compression the fuel can withstand before detonating (igniting). In broad terms, fuels with a higher octane rating are used in high performance gasoline engines that require higher compression ratios. In contrast, fuels with lower octane numbers (but higher cetane numbers) are ideal for diesel engines, because diesel engines (also referred to as compression-ignition engines) do not compress the fuel, but rather compress only air and then inject fuel into the air which was heated by compression.
thank you for the quick response, I did as you stated but sadly it did not work
Search Hyundai Santa Fe Questions
Hyundai Santa Fe Experts
Related Models For Sale
Used Cars For Sale