Copper washers are for "banjo" brake fittings. You may or may not have the banjo style fitting where the brake lines attach to the calipers. A good representation of "banjo bolts" and fittings are at the link.....http://www.jegs.com/p/JEGS-Performance- Products/JEGS-Brake-Line-Fitting-Adapters/1149934/10002/-1
I'm putting new calipers on front they come complete with bracket but also came with 2 small copper looking washers not sure where they go
2006 Ford Escape XLS FWD
-
Maintenance & Repair
My brakes would lock up on my front right tire. I have changed the caliper and the brake pads to see if that would help but no luck. So then I changed the master cylinder and it stopped for 2 days ...
2008 Ford Escape XLS FWD
-
Maintenance & Repair
Ford dealer is telling me front brake calipers are sticking and need to be replaced. Car sat for extended period and I believe sticking is due to rust that will be removed if calipers are exercised. ...
Ford Escape
-
Maintenance & Repair
Will brake calipers from a 1996 Buick LeSabre fit on a 1994 Buick LeSabre
Maintenance & Repair
When I press the brakes the turn signals light up with the brake lights and when I turn on the turn signals the corresponding brake light blinks as well
2005 Ford Escape Limited FWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.