Clean/grease the slide pins, replace the flex hose. A bad flex hose can trap brake fluid not allowing it to flow back to master cylinder.
Had same problem on drivers side. Replaced hose and works like new. Easy fix.
Replaced the flex hose the old one was stopped up works great now TY
1995 Chevrolet Chevy Van G20 RWD
-
Maintenance & Repair
I have a Chevy 20 van That will start up just fine. After being shut off an hr it wont start. It tries to but not enough spark. I had it in and they cant figure it out. I was told im not getting enoug...
1990 Chevrolet Chevy Van G20 Extended RWD
-
Maintenance & Repair
1987 chevy 3/4 ton 5.7 w/ 350 replaced fuel pump, fuel filter, pump relay switch, ignition module,dist. cap, plug and wires, temp. sensor switch, ignition coil, alternator and battery starts , runs f...
Chevrolet Chevy Van
-
Maintenance & Repair
Started and ran for about 2 minutes it died now won't start
1986 Chevrolet Chevy Van
-
Maintenance & Repair
Wondering if anyone has encountered something similar here, this one is a puzzler. I bought the van not running, seller said it just wouldn't start one day, Engine cranks over fine but shows no sign...
1995 Chevrolet Chevy Van G20 RWD
-
Maintenance & Repair
CarGurus has thousands of nationwide listings and the tools to find you a great deal.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.