When starting in the morning I hear a low tapping sound from the engine passinger side.

When starting in the morning I hear a low tapping sound from the engine passinger side. 1 Answer

It only happens when I move the car in drive for about 2 minutes.After that you can barely hear it.It sounds like a small screw driver tapping on a piece of metal but muffled.The car has a v6 with 10...

When starting in the morning I hear a low tapping sound from the engine passenger side. you can barely hear it.It sounds like a small screw driver tapping on a piece of metal but muffled.The car has a v4 with 120 000 miles. 1 Answer

Toyota Camry 2008 full automatic making too much noise from engine early morning when my engine was cold just for 10 minutes once in a day. Then it become to the normal sound. What is the exact proble 3 Answers

Toyota Camry 2008 full automatic making too much noise from engine early morning when my engine was cold just for 10 minutes once in a day. Then it become to the normal sound. What is the exact pr...

my toyota camry se 2008, engine 2.4, from 4 days in the morning and after work ... 9 Answers

my toyota camry se 2008, engine 2.4, from 4 days in the morning and after work how the engine will cool, it ignites hard, does not give the starter a spin, battery damage, five spins after 1-3 secon...

I drive a Toyota camry xle 2007. Recently i hit a side of a side walk and d tire got damaged and rim bruised. i changed the tire and noticed the car was swerving to one side so i did the alignment but the car still gradually drifts to the right while in motion. i have tried the alignment at different places but its still d same and i have now be made to understand that the alignment is fine and somthing else must be wrong maybe from the sidewalk incident. please advice what else could make the car to drift/swerve when in motion. Thanks 3 Answers

I drive a Toyota camry xle 2007. Recently i hit the side of a side walk and d tire got damaged and rim bruised. i changed the tire and noticed the car was swerving to one side so i did the alignment...