when i start car it goes to high idle of 3800 rpm could this be a vacuum or emissions hose routing problem as all were off prior to problem

Asked by IrishD89 Mar 21, 2008 at 06:07 PM about the 1989 Chevrolet Corvette Coupe RWD

Question type: Maintenance & Repair

recently had numerous parts off to be powder coated, put it back together but lost my vacuum and emissions hose key. may have put some on incorrectly routed. Could this be problem or is there another more plausible solution.

papa answered 16 years ago

more than likeley a vac leak or more 3800 rpm at idle.did you have throyle body power coated,if so that could be the problem.

Mark helpful

Your Answer:

when i start car it goes to high idle of 3800 rpm could this be a vacuum or emissions hose routing problem as all were off prior to problem 1 Answer

recently had numerous parts off to be powder coated, put it back together but lost my vacuum and emissions hose key. may have put some on incorrectly routed. Could this be problem or is there another...

1989 Chevrolet Corvette Coupe RWD

-

Maintenance & Repair
I have a 1986 Vette, all of a sudden it revs very high and won't go down any. What can the problem be? 1 Answer

My 1986 Vette is having a problem all of a sudden when I start it it runs really.high, 2400 rpms. And it doesn't go down. The only thing I have done is spray some WD40 on the accelerator cable.

1986 Chevrolet Corvette Coupe RWD

-

Maintenance & Repair
Engine rouygh idle loads up, better under power but will die at stop. car has stright pipes could this be a problem. 5 Answers

I just got this car on a trade the other owner said he was over it because he could not find the problem with the engine, it is the 350 throttle body model, he could not find the problem, I wonder if ...

Chevrolet Corvette

-

Maintenance & Repair
I have a 1969 Chevy Corvette. I have rebuilt or replaced almost every thing. I have not replaced the original A/C compressor but converted it to the new Eco friendly freon. I had it tested three times, had the cooler boxes cleaned out, fan replaced, yet I have trouble getting the car cool. I live in So. Cal. where it is a necessity of life to have the A/C work as good as when new from the factory. I put in heat/sound shielding under the floor mats, and had all components check for proper functioning. I was thinking of going to a serpentine belt system that would get the newest A/C compressor with the system. Has anyone done this or have any suggestions? 9 Answers

The A/C system does not leak, holds the proper pressure

1969 Chevrolet Corvette Stingray Coupe

-

Maintenance & Repair
I have a1987 corvette that wants to idle out when stopping at a lite or stop sign. Not all the time just sometimes 1 Answer

The vette will idle out then have to re-start. It does not do this all the time. It is a 4 speed

1987 Chevrolet Corvette Convertible RWD

-

Maintenance & Repair

Used Chevrolet Camaro

16 Great Deals out of 476 listings starting at $11,995

Used Ford Mustang

53 Great Deals out of 1,636 listings starting at $6,977

Used Porsche 911

14 Great Deals out of 216 listings starting at $21,480

Used BMW M3

10 Great Deals out of 79 listings starting at $14,995

Used Ford F-150

319 Great Deals out of 13,095 listings starting at $3,000

Used BMW 3 Series

74 Great Deals out of 1,247 listings starting at $2,900

Used Toyota Supra

5 Great Deals out of 58 listings starting at $55,888

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.

when i start car it goes to high idle of 3800 rpm could this be a vacuum or emissions hose routing problem as all were off prior to problem

1 Answer

Your Answer:

Shortcuts

Search Chevrolet Corvette Questions

CarGurus Experts

Find great deals from top-rated dealers

Related Models For Sale

when i start car it goes to high idle of 3800 rpm could this be a vacuum or emissions hose routing problem as all were off prior to problem

1 Answer

Your Answer:

Related Questions