I have a C-2 corvette conv. 1966. What used seats will fit the C-2? i have heard pont. feira work/ any other makes. does anyone have the dimensions of the seat or cavity they sit in. my upolstry sho

Asked by concorv Apr 29, 2015 at 03:39 PM about the 1966 Chevrolet Corvette Sting Ray Convertible RWD

Question type: Car Customization

I would like help with the dimensions that any used seat might work for my 1966 c-2 corvette, until I can locate some originals. mine were stolen when the upholstery shop went under along with my seats. I would like to find a seat that I only have to deal with track adjustments, not cutting the seat tops down or anything and reupholstering them .at this time

40

gomike answered 8 years ago

i think a 66 should have the org. seats i might help u with that i am in a car club andi know corvette people pleace visit kentuckyclassiccarclub.com under contact ask for help and summit

Mark helpful

50,715

John answered 8 years ago

If you want original seats, pick up a magazine that is dedicated to Corvettes and you will find a lot of businesses that sell rebuilt or custom seats for the C-2 Corvettes. Vette Magazine is one that has seats advertised and also go on line and make sure the company is a respected legit one. Actually any C-2 seat frame rails will fit.

Mark helpful

Your Answer:

I have a C-2 corvette conv. 1966. What used seats will fit the C-2? i have heard pont. feira work/ any other makes. does anyone have the dimensions of the seat or cavity they sit in. my upolstry sho 2 Answers

I would like help with the dimensions that any used seat might work for my 1966 c-2 corvette, until I can locate some originals. mine were stolen when the upholstery shop went under along with my seat...

1966 Chevrolet Corvette Sting Ray Convertible RWD

-

Car Customization
How do i remove the rear spoiler from a 1975 Corvette AND does the removal mean all i have to do? 2 Answers

When removing the rear spoiler from a 1975 Corvette, is it neccessary to do anything else or is the car ready to go.

1975 Chevrolet Corvette

-

Car Customization
Will any c4 sawblade rim fit an '86 corvette? some sites say they are all same size, others say they are bigger in the rear...? 2 Answers

I know a little chevy, but am corvette ignorant... want to but sawblade rims on my '86 - not a zr1. I found a couple sets online but they are the sets that the rims are bigger in the rear... will the...

1986 Chevrolet Corvette

-

Car Customization
I have recently purchased a 1965 Chevrolet Corvette. It is a rest-mod. It has Shark Bite coil-over-shocks. The coil is adjustable with a "special" wrench. In which direction do I turn the coil to make the ride more comfortable and less "stiff"? Thanks 2 Answers

My newly purchased 1965 Corvette coupe resto-mod has after-market Shark Bite suspension elements. I have a unique pair of wrenches to adjust the coil. I need to know which direction to adjust the ...

1965 Chevrolet Corvette Coupe

-

Car Customization
Hello all. I have a 1975 Corvette L48 with side pipes. No muffler. What is the most economic way to deaden the sound a bit? 3 Answers

Side pipes come straight off the manifold, no mufflers.

1975 Chevrolet Corvette Coupe

-

Car Customization

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.