1994 Chevy Silverado 1500 k

Asked by Aug 13, 2017 at 01:36 PM

Question type: Maintenance & Repair

Brake lights won't come on have running
lights and turn signals have replaced all that
I can think of what can I do

5 Answers

3,200

Have you tested brake switch?

Yes I have I have power to the switch the only thing is I check fuse and fuse box fuse was fine but no power coming from that fuse spot

3,200

Some brake switches can work 38 out of 43 times and be bad. Have you hooked it up with a test light and just pressed on that tip about a hundred times to see if it fails a few times? No power at switch with key on? Not understanding how you could have power at switch but none at fuse box...is the terminals in the fuse box squeezing the fuse well enough? This can be a point of issue.

I have tested switch numerous times with probe and it still works fuse prongs are tight and still nothing

3,200

When you turn key, does your power probe give you power on one side of fuse and ground on the other for the fuse of the brake switch? If not you might have an issue under fuse box. Green crusties...

Your Answer

Shortcuts

Maintenance & Repair Experts

  • #1
    Tom Demyan
    Reputation
    184,740
  • #2
    dandyoun
    Reputation
    96,900
  • #3
    tennisshoes
    Reputation
    81,640
View All

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.