I have a 97 mustang that has an
older 5.0 in it now. I get in it to
start motor and get nothing from
starter at all. No clicks, nothing
but do have power to the rest of
the car. Windows, raido, fuel pump
ect. Pulled starter with attached
solenoid and it tested good. My
car does not have solenoid relay
but a fuse panel on dr. finder. I've
checked all fuses and wires.
What's my next best option???
with the starter out you should have checked to see if power is getting to the solenoid when you hit the key , Batt terminals are clean and tight ?