2005 ford f150 stx 4.6 automatic
Last couple days my truck drove fine going
forward but when tried to back up noticed
loud clanging noise.go forward was fine
again. Today i tried backing up in reverse it
made loud cland again and stopped me
completely like i had hit fencepost. Then
tried go forward n acted like wasnt in
gear.tried forward,reverse nothing. It did
manage to kick in drive but very little power
in the motor. Got it home. Now it starts fine
but when put in drive or reverse i have to
really rev engine in order to get it to move at
all then its like itll catch and really try to take
off. Please help if can on this issue. Ty
10 Answers
lets start with fluid levels and quality ..trans, transfer case(if applicable) and diff(s)
also have a peek at u joints. what about diff and t-case if 4x4
Frustratedfordowner1... answered 5 years ago
I was thinking u joints yesterday but today when it wouldnt hardly move in any gear im thinking otherwise. U joints seem fine. Will check other fluids if can. Yes its 4x4.
reverse input clutch is only 1 part of reverse you have direct clutch and also sun shell and gear (planet also) 4.6 L should be a 4R75W transmission
Frustratedfordowner1... answered 5 years ago
Now ill start it "starts fine" idles well. Put it in drive foot off brake n it wont move. I push the gas like half way down n itll start moving slowly then itll catch n take off . does same in reverse
Frustratedfordowner1... answered 5 years ago
But theres like no power like it should be from the motor once it takes off when it catches. If that make any sense lol
t-case should be 4406 borg warner also known to break shift forks inside especially 4x4 on the fly (mode switch on dash) also tire size must be all the same on vehicle or t-case can take damage
Check the fluid level but I think your transmission has a internal mechanical failure.
Frustratedfordowner1... answered 5 years ago
Like said trans fluid is good. Will let ya know. Trying get ahold my mechanic n see if he can take look at it. Ty for yalls input