aztec626bf answered 12 years ago
Since these are separate systems is there any chance you had mice in the vehicle?
No chance at all. I have found these same problems on a couple of message boards and they seem to point to the trailer harness/plug or a fuse under hood "small light" ?? Im not savy of either so waiting for a friend to ck those.
I dont have any dash lights or tail lights all fuses seem to be good. any idea??
Dodge RAM 150
-
Maintenance & Repair
Would a blown headlight cause my headlights and taillights/break lights not to work on my 1989 dodge pick up? I've replaced the switch, fusible links, wiring, and fuses. I'm not sure how to check i...
1989 Dodge RAM 150 LB RWD
-
Maintenance & Repair
Last summer the throw out bearing (pressure release bearing per Dodge) failed, so the throw out bearing, pilot bearing and flywheel were replaced along with the pressure plate getting turned. It has ...
Dodge RAM 150
-
Maintenance & Repair
Had wiring done already. Problem started again. Turn off headlights, all gauges return to normal position. The driver's seatbelt also buzzes when it's not clicked. It's never did this before. Hea...
1983 Dodge RAM 150 LB RWD
-
Maintenance & Repair
My 2006 Dodge Ram 1500 MEGA Cab running low RPM (600) at 60 to 65 MPH. Seems to be running ok but low pulling power. What is the issue??
Dodge RAM 150
-
Maintenance & Repair
CarGurus has 1 nationwide RAM 150 listings and the tools to find you a great deal.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.