Why is my brake light on, yet the brakes are fine
Your emergency brake must be pushed down some. Try releasing the emergency brake.
You need to add brake fluid or just to fully release emergency brakes
Why does my abs like stay on
WW21N, more than likely there is a broken wire that runs down to the wheel sensor, usually in the area of where the wire flexes from where the wheel turns. To find this, a scanner that reads abs codes saves a lot of time in finding which wheel has the problem. The scanner would indicate a faulty wheel sensor when actually there is a broken wire. But if you have a bad wheel bearing, that would damage the wheel sensor causing the abs light to come on. On older models were the wheel sensor is mounted separately to the wheel bearing housing, rust develops under the wheel sensor housing, causing an abnormal gap between the sensor and the reluctor wheel that it reads off of. In this case just a matter of pulling the wheel sensor and cleaning the mounting surface for the wheel sensor. Tracing a broken wire you would need a digital multi-meter to find the break. Parts stores sell a new connector and section of wire to be replaced.
Looking for a Used Grand Caravan in your area?
CarGurus has 10,061 nationwide Grand Caravan listings starting at $2,939.
Search Dodge Grand Caravan Questions
Dodge Grand Caravan Experts
Related Models For Sale