Asked by Sportvan_1075 Feb 22, 2017 at 03:06 PM about the Chevrolet S-10
Question type: Maintenance & Repair
i DROPPED LITTLE SCREW DOWN INTAKE HOLE< I THINK? CANT FIND THE SCREW SO MOST LIKELY. i HAVENT DONE THIS BEFPORE AND NOT MUCH MECHANICALLY INCLINED. CAN YOU GIVE ME SOME POINTERS OF WHAT NEEDS TO BE ADDRESSED,
i DROPPED LITTLE SCREW DOWN INTAKE HOLE< I THINK? CANT FIND THE SCREW SO MOST LIKELY. i HAVENT DONE THIS BEFPORE AND NOT MUCH MECHANICALLY INCLINED. CAN YOU GIVE ME SOME POINTERS OF WHAT NEEDS TO ...
Chevrolet S-10
-
Maintenance & Repair
Was rolling in 5th gear going 60, heard aloud screeching noise and it threw us forward in the seat and slowed it immediately to about 40.I pulled off to the side of the road and smoke was coming from...
1991 Chevrolet S-10 RWD
-
Maintenance & Repair
Is this where the water pump is, or is this another gasket problem. I replaced the hose and have checked the tightness numerous times.
1991 Chevrolet S-10 Extended Cab RWD
-
Maintenance & Repair
I broke my key in my ignition, I tried breaking out column to start with screw driver but didn't go as planned, How do I hot wire it? which wires do I need to connect?
2000 Chevrolet S-10 Extended Cab RWD
-
Maintenance & Repair
I changed out fuel filter a day ago it was starting and running good. Now it does not want to start. Fuel pressure about 48 psi. Will start if I gas in intake. Checked Schrader valve just before...
1999 Chevrolet S-10 LS Extended Cab RWD
-
Maintenance & Repair
CarGurus has 2 nationwide S-10 listings and the tools to find you a great deal.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.