Brake switch under pedal or break in wiring. Also see if there is any relays associated with brake light circuit in your car. Ground wire must be clean and free of rust and corrosion at connections. Sounds like a wire chasing task.
We already changed the switch under the pedal. But I will definitely have him check the wiring and relays. Thank you
I have no brake lights...fuses were changed as well as the bulb
Ford Escape
-
Maintenance & Repair
When I press the brakes the turn signals light up with the brake lights and when I turn on the turn signals the corresponding brake light blinks as well
2005 Ford Escape Limited FWD
-
Maintenance & Repair
2008 Ford Escape
-
Maintenance & Repair
I changed the driver side turn signal front and back because the light was flashing at a very fast rate. normally I know that it usually indicates that a bulb is out, they were both still blinking so ...
2006 Ford Escape XLT FWD
-
Maintenance & Repair
after driving in pouring rain I parked my 2006 ford escape at the hotel and when I got ready to leave next morning brake lights were on and never went off
2006 Ford Escape XLT Sport AWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.