operator_13 answered 10 years ago
I'd take a look at the linkage...and the transmission mounts for change in geometry...perhaps because the parking brake was not set, but depended on the torque-ability of the transmission mounts to hold on~ they separate and are made from cheap butyl rubber instead of neoprene~ cut ye corners where ye can~
no reverse
Jaguar X-TYPE
-
Maintenance & Repair
My jag isnt accelerating properly.. 02 sensors changed. Plugs and 3 coil pack... but still not 100% any ideas what it could be
2004 Jaguar X-TYPE 2.5L AWD
-
Maintenance & Repair
My 2003 x-type 3.0 Jaguar transmission is slipping, I want to put some Lucas non slip oil in my tranny fluid...Where do I put it in?...
2003 Jaguar X-TYPE 3.0L AWD
-
Maintenance & Repair
I had the oil pan gasket changed on a 2003 X-Type Jaguar (11hrs labor). After driving two days, went to start car and heard a clanking sound. Found serpentine belt tore, and car will not engage into d...
2003 Jaguar X-TYPE 2.5L AWD
-
Maintenance & Repair
I have a 03 Jaguar x-type. When I bought it it had to blown head gaskets. Had had put new head gaskets on head-to-heads resurfaced. Put car back together we got the motor back in it. Misfires on 1...
2003 Jaguar X-TYPE 2.5L AWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.