I have a Chrysler 200 2012, lightning bolt and ESP lights flash car goes into limp mode, had it to the dealer codes p2102 and p2110 came up, should I replace it or look at the keys first going crazy, there has to be someone that can help PLEASE
There has been a lot of this issue, with the 2000 chrysler,usually it is the PCM that ends up being the problem,you can have some one replace the sensor,s but will more than likely lead you right back to the PCM being the problem,google this and read other.s with same issue..HTH.
I ment to say 200,not 2000.
I have a Chrysler 200 2012, lightning bolt and ESP lights flash car goes into limp mode, had it to the dealer codes p2102 and p2110 came up, should I replace it or look at the keys first going crazy, ...
Chrysler 200
-
Maintenance & Repair
Car did not start, it wants to bells and radio came on so I tried again without pushing brake as it is stuck. Today living for work and will not start same situation but will not fully start. What i...
2015 Chrysler 200 Limited Sedan FWD
-
Maintenance & Repair
My daughter's car overheats on the highway but cools at slower speeds also tge thermostat goes up and down when she hits a bump
2013 Chrysler 200 Touring Sedan FWD
-
Maintenance & Repair
Why does my car cut off after running for 5 minutes and I have a new battery
2012 Chrysler 200 Touring Sedan FWD
-
Maintenance & Repair
I have a 2014 Chrysler 200 it was fine yesterday today while driving down the road it was in drive but stopped wouldn't move the check engine light came on out of nowhere then I turned it on and t...
2014 Chrysler 200 S FWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.