I have a 84 Cutlass Supreme
I have a 84 Cutlass Supreme Mustang
column is extra loose and now the car won't
start what's the problem
sixfootsix_car_guy answered 8 years ago
Most likely the ignition coils, wiring, or switch has become loose, worn, or damaged. I would take the column apart (which should be easy since its pre-airbag module) and make sure all of the ignition wiring is still intact and tight. Let me know if you need more help and best of luck!
I have a 84 Cutlass Supreme Mustang column is extra loose and now the car won't start what's the problem
1984 Oldsmobile Cutlass Supreme
-
Maintenance & Repair
I just bought a 95 cutlass supreme convertible. I wanna put the top down but I’m worried the switch or motor might be bad. Will I be able to put the top back up manually if I have to ??
1995 Oldsmobile Cutlass Supreme 2 Dr STD Convertible
-
Maintenance & Repair
I have a 1993 Oldsmobile Cutlass Supreme convertible and my battery is draining to dead overnight and I can't find the apparent reason why, any suggestions ?
1993 Oldsmobile Cutlass Supreme 2 Dr STD Convertible
-
Maintenance & Repair
I have a 1986 supreme Cutlass how do I find a transmission
1986 Oldsmobile Cutlass Supreme
-
Maintenance & Repair
I've replaced upper and lower plenum gaskets, refurbished fuel rails and new injectors, replaced wires that were corroded to the point the car wouldn't run, then had that problem fixed, it was runni...
Oldsmobile Cutlass Supreme
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.