Capn_Steve answered 6 years ago
you have to have the trans out. Pull the converter and use a lip seal puller to remove it. You will need a seal driver to install the new one. Just hammering it in will damage it and it will soon leak. The seal installer is a must, but you can use a small chisel on the edge of the seal to crush it then pry it out. Be careful not to damage the seal bore or shaft though.
1994 Ford F-350
-
Maintenance & Repair
need to remove the heater duct work to fix broken part
1994 Ford F-350 4 Dr XLT Crew Cab LB
-
Maintenance & Repair
sometiumes it will be fineone daY then i turn it off and when i start it the next morning theres no juice. once even it had no juice and i created a static shock to my steering wheel while sliding out...
1994 Ford F-350 4 Dr XLT Crew Cab LB
-
Maintenance & Repair
I have a 1994 f350 with the 460 windsor it was running fine i cut it off then tried to start it again and all i got was a click wat could it be
1994 Ford F-350 2 Dr XL 4WD Standard Cab LB
-
Maintenance & Repair
The far right cab light is leaking on my 2001 Ford 350, that fills the glove box and onto the floorboard. I am trying to find out how to get the cab light base off to re-seal it, Do you have to tak...
Ford F-350
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.