i have a 1994 ram 1500 truck had a 5.2 in from factory auto 4x4 put a 2000 5.9 in it the truck still has 94 5.2 ecm truck runs decent but has idel flux. i would like to put a 5.9 ecm in the truck but dont know where to start because harness and ecm plugs are diffrent on 2000 model. any ideas and yes the 5.9 runs and drives with the 5.2 ecm

i have a 1994 ram 1500 truck had a 5.2 in from factory auto 4x4 put a 2000 5.9 in it the truck still has 94 5.2 ecm truck runs decent but has idel flux. i would like to put a 5.9 ecm in the truck but dont know where to start because harness and ecm plugs are diffrent on 2000 model. any ideas and yes the 5.9 runs and drives with the 5.2 ecm 1 Answer

Will an 5.9 trans fit a 5.2? 7 Answers

I have a 1998 Dodge Ram 1500 5.2 sport package 4x4 an I can't seem to find a 5.2 4x4 trans anywhere but I found a 5.9 trans an it's 4x4 an I was wondering if it would bolt up an if so what would I n...

Can I swap a dodge 5.2 to a dodge 5.9 1 Answer

Can I swap my 98 dodge ram 1500 5.2 to a 99 dodge durango 5.9

i have a 1500 dodge ram year 2000 and it cranks but wont start i think it has to do with the alarm but ive tryed alot locking it and unlocking it i did a hard rest still nothing what do i do 1 Answer

it has an HID system hooked in for the lights but i cant figger it out

I was putting a new radio into my 03 Ram 1500 and just to make sure the radio worked in it.I must have not protected a couple of the wires all the way and a couple of the wires touched on the back of the radio. after the fact, the courtesy light wont come on when opening the door, and Pretty much all the functions that a vehicle is supposed to perform without turning on the vehicle don't work. and neither does the radio when I hook it up. Yes, i checked all the fuses in my fuse box. I even wen to the point of replacing all of the, even the ones that i thought had nothing to do with the situation. the radio still works because i checked it by putting power to it by directly putting it to the battery. and the fuse didn't pop in the back of the radio when all this happened. so at this point I'm completely lost. Any help with this would be much appreciated. 1 Answer

Putting in a new radio, a hot touched something and now nothing works.