brakes scrubbing
My front driver brakes are scraping bad. I just
replaced the wheel bearing because it went out
driving Saturday. Took the caliper off to replace the
bearing and it seemed fine. I have also checked
the brake line and no where is clamped. When I
crank it up and drive for a sec in reverse then in
drive(just to move out from carport and back in)
the brake pedal is normal when pressing them in
and letting off them. But it's still scrubbing. I'm
sure the caliper is locked because of how bad the
scrubbing noise is. How can I get them to
disengage from the rotor and back to normal?