none of my door locks will work from the power switch or key fob is anyone know what could cause this?

does the pass lock switch work

have you check your fuses I had to replace mind number 22 i think

My power locks not working both on the doors and key fob. My fuses look good. help

Has anyone figured this out? I have the same problem?

I have the same problem

Has anybody found a solution to this I have the same issue

Check the driver side door switch control, if that goes bad all the locks will stop working including for the key fob. It runs off a 5 volt reference. Windows can still work but locks will all stop.

I had the same issue where all my power switches weren’t working on my 06 Dodge Ram. Quick fix in the fuse box, mine was the #2 for the CCN door locks needed to be replaced.

I have the same problem. Both door lock switches and the key fob. Just replaced the drivers side switch. The intermittent window problem is gone. Fuse in the fuse box is good. What should I check now?

It was my fuse. Number 2 20 amps

2006 dodge ram 1500 all door locks not working. I found my problem #2 20amp fuse ccna door locks/tstsi and #35 15 amp ccn illumination fuse. Both fuses check ok the pins on fuse box rust film on them cleaned contact by sliding fuses in and out several times until clean locks work by door switch and key fob

On a 2007 dodge ram, the power door locks are controlled by instrument cluster. Assuming your fuses are good. Cluster replacement is the only fix, or repairing the board with all the gauges on it.

BTSI solenoid under the steering column will be the culprit if your fuses check out and you have 5V at the door switch..

Only Right rear door lock doesn't work. Have replaced it. What now

The wires in between the door break could be you need a new harness from the piller to the door in the rubber thing very common issue on them

Mine work when they want on my 05 Dodge

I fixed mine without doing any maintenance. My fob wouldn't lock my doors and the door lock button didnt work either. I fixed it by going inside the truck and manually locking and unlocking the drivers side door, while pushing the lock and unlock buttons on my key fob... IT WORKS NOW!

2014 Ram 1500. First time key fob just quit working when I got home, but inside buttons worked fine. I tried the key fob lock and unlock with the doors while running and opening and closing the tailgate (tailgate worked). Second Time: I messed around with pressing locks and key fob while the truck was running and that didn’t fix it. Tailgate didn’t work either. What just worked for me was going into the settings menu and changing something in how it locks. Maybe it was a combination of things IDK. They work again for now. I’m thinking something is going out, but hasn’t failed yet. Just not sure what it could be.

Changed the battery in the key fob and played with settings fixed mine, but only after playing with settings