Auto_Adrenaline answered 6 years ago
P0128 - Coolant Thermostat Error. Could be stuck or thermostat could need replacing. P0340 - Camshaft Position Sensor error. This indicates an error in the camshaft sensor circuit. This could be fixed by replacing the sensor itself, though it could also be wiring in the circuit or the PCM. This one is very tricky to troubleshoot as it could be a shorted/broken/grounded wire or connector somewhere in the circuit.
i am trying to find about why my engine light is on these are the two codes po128 and po340 for a 2006 pt cruiser chyr
2006 Chrysler PT Cruiser
-
Maintenance & Repair
I was a stop light and my car started over heating and I fixed the themstat and it's still gets hot what is it someone help me it's a 2008 pt crusier.
2008 Chrysler PT Cruiser LX Wagon FWD
-
Maintenance & Repair
My 2005 PT Cruiser was driving fine, then I came to a stop light and it wouldn't move. It died, when I tried to start it again it would start but as soon as I put it in gear it died again, also the ...
2005 Chrysler PT Cruiser Limited Turbo Wagon FWD
-
Maintenance & Repair
I only have one gray key to my 2001 PT. Now my car won't start and the security light is on and a clicking/buzzing sound but my car won't start. We have tried to disconnect the battery, locking and...
Chrysler PT Cruiser
-
Maintenance & Repair
My engine light is on and I know the manifold pressure sensor is bad it just died while driving no indication that it was getting ready to die and now it doesn't crank and there is no click it's li...
2006 Chrysler PT Cruiser Wagon FWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.