You are going to require a tank and fuel pump at a minimum. Best invest on a repair manual which would list the components of the system. Pay careful attention to any EVAP components listed. You may require those also.
Don't forget the straps, brackets and bolts securing the tank to the vehicle, they are probably missing also. Make sure you obtain the proper grade bolt for securing mechanism.
1995 ford150 5.0 needs a gas tank what parts do i need
1995 Ford F-150
-
Maintenance & Repair
plate inside gas opening will not allow an unleaded gas hose inside to fill up vehicle.
2009 Ford F-150 XLT SuperCab SB
-
Maintenance & Repair
I have 2010 Ford F150 lariat 5.4 . There a water pipe that runs under the intake manifold that goes ti a fitting that is in the block behind the water pump.Can it be replaced or do I need a new bloc...
2010 Ford F-150 Platinum SuperCrew 4WD
-
Maintenance & Repair
Ford F150, 1988, 6 cylinder pickup Truck bucks when going uphill. I used fuel injection cleaner, and it cleared up for a while, and then started bucking again. I think I need to replace the fuel filte...
1988 Ford F-150
-
Maintenance & Repair
may be water or some one sugared me or something can't keep it running it was running go till this I pulled the gas line and there is some white stuff in it when I pumped it into a old milk jug there ...
1981 Ford F-150 STD Standard Cab 4WD LB
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.