Asked by touch_of_gold_car_cl... Dec 18, 2006 at 11:40 PM about the 1969 Chevrolet Impala
Question type: General
is this unique with an ss427 engine?
Hello The SS 427 badge was option Z24 on the base 1969 Impala model. It came with two engines: a V8 with a Rochester single four-barrel carburetor which was rated at 390 horsepower at 5400 rpm and had 460 lb-ft of torque at 3600 rpm and a special COPO that had an 800-cfm Holley Carburetor which produced 425 horsepower at 5600 rpm and 460 lb-ft of torque at 4000 rpm. I'm not sure the valve covers would give a proper answer, but checking the carburetor should help. Best of luck! CarGrrl
the weiand intake is most likely aftermarket. the 427 is a unique engine there wasn't many in the impala. as far as hp rating just look in a repair manual. there were 427s with 390 & 425 hp .
is this unique with an ss427 engine?
1969 Chevrolet Impala
-
General
My former neighbor told me of his brother-in-law road testing this 427 STREET V-8 in a 1963 Impala SS (brand new at the time) as he waited for his new 1963 Impala SS to be delivered. He told me that t...
1963 Chevrolet Impala
-
General
I found a 67 impala in the woods this weekend that has a SS427 hood on it, my question is do they repop that hood? Any info would be helpful, dont know much about the 67s Thanks, John
1967 Chevrolet Impala SS Hardtop Coupe RWD
-
General
I have asked a few people and some say that the only impalas that came with a fully boxed frame were convertibles and some SS models. Mine is neither. I have checked the vin number and it says the car...
1966 Chevrolet Impala
-
General
What is the over all length and wisth of a 1962 Chevrolet Impala ss
1962 Chevrolet Impala
-
General
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.