I recently wrote about my 1994 Toyoda 4 runner, I just had a new clutch master cylinder installed today and while driving it home while in 4th gear it started slipping and over reving

I recently wrote about my 1994 Toyoda 4 runner, I just had a new clutch master cylinder installed today and while driving it home while in 4th gear it started slipping and over reving 2 Answers

between what years did the body of the 4 runner change? I have a 95, 4 runner and going to be doing some body work on it, just wondering what years i can use the same trucks? it's the 4cylinder 1 Answer

My 4 runner is a little rusty, going to be doing some body work on it this spring. I am looking at other 4 runners to buy pieces and parts from. I am just wondering between what years i should be look...

2007 toyo 4 runner: i dropped a penny to the 5 volt cell phone plug in and cause sparked then disable when I took it out! I how can I bring it back it life! 2 Answers

I checked all the visible fuse at engine compartment, all are ok excepted the big fuse which I can not tell if it is still ok!

My 1995 4 runner starts fine then runs for about 10 min. and just stops running (just the motor just stops. 1 Answer

My 1995 4 runner starts fine then runs for about 10 min. and just stops running (just like as if you turned the motor off)this happens alot.(all the time)when I am driving along the motor just stops (...

i have replaced my ignition switch on a Toyota 4 runner, now it will not start. Is there a reset step that needs to be preformed and how? 4 Answers

I have replaced my ignition switch on a Toyota 4 runner, now it will not start. It does however turn over strong but seems there is no fire. Is there a reset step that needs to be preformed and how?