crazzy450r answered 16 years ago
hay man , im trying for ya here but the haynes manuel dosent list ether all it says is "locate the VECI lable under the hood and read through and preformall preliminary instructions" if you dont have the tag any longer i would suggest you call your loc. junck yards untill ya find one with a 91 then run out and see.
on a 2.8L V6, it's 10 degrees BTDC and redlines at about 5000 or 5500 rpm.
1991 S-10 BLAZER 2 DOOR NEED TO KNOW WHAT THE IGNITION TIMING IS TO BE SET AT ALSO THE RPM NUMBERS TOO
1991 Chevrolet S-10 Blazer
-
Maintenance & Repair
Vehicle SUV 1993 Chevy Blazer LT Tahoe (S-10) V6 4.3L Vortec . Symptoms · Engine cranks but doesn't start. (doesn't even try to start, no-sputtering while cranking). Engine is acting as tho it'...
1993 Chevrolet S-10 Blazer 4 Dr Tahoe LT SUV
-
Maintenance & Repair
i have an 88 s10 blazer the trabs is leaking a small amount of fluid but the levels show ok when i put it in gear the trans clicks when i am driving is there anyone that has any idea on what this migh...
1988 Chevrolet S-10 Blazer
-
Maintenance & Repair
Just got this s10 blazer tahoe lt did not run fixed it but has one rocker button for 4wd but is cracked and faded can't read it where can I get one and what is the right name of it when I put the ye...
1994 Chevrolet S-10 Blazer
-
Maintenance & Repair
when my head light are off my signal lites work, when they are on signal lites illuminate but do not flash, now when the signal lights r used all of the dash flashes, and if you hit the brakes, it sto...
Chevrolet S-10 Blazer
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.