1996 s10 not fireing

What have you checked? If it has an ignition module, that is a likely culprit.

Have you checked the ignition, fuel, spark, etc.?

the vehicle will not start if the fuel pressure is below 45 or so due to the centri port fuel injectors requiring high pressure. check for spark also at each spark plug. specify more details rather it cranks and other stuff that you do know and more precise answers will come

coil pak could be a proplem also the fuel pump may have gone bad.when you turn the key switch on do you here a buzz sound at gas tank,if not fuel pump is gone bad.the crank sencer could also be bad-located at HB.

I replaced my fuel injectors which is pricy but it completed revamped how my truck started. My truck would take 10 seconds before it fired up.

I have a 88s10.2.8lv6.and I've tired to get this truck to run.and it wont start at all.I had the timing chain replaced and it was working just fin and then me and a friend went for a short drive stop to get beer and went to leave and no start. I checked the distributorand it was vary lose.I think it's way out of Time. Put it at tdc put the rotor at the number 1cyclederandput it wont firer unless I hold the gas to the floor. Can u please help