305 5.0 vortech to 350 5.7 vortech swap

10

Asked by Apr 28, 2017 at 12:56 AM about the 1998 Chevrolet C/K 1500

Question type: Maintenance & Repair


All Questions
jowoonsocket about a year ago can I switch my
1996 k1500 305 motor and tranny for a 350
I bought a 96 k1500 4x4 with a bad tranny and now
the head gasket went, I don't feel like repairing it
has 230000 but I cant find a decent 305. I found a
97 with a rotted frame but motor and tranny have
127000. I wanted to know if I do change over will I
need to change the harness and the computer

1996 Chevrolet C/K 1500 Silverado Standard Cab
SB Car Customization
935 12
90,815
tennisshoes about a year ago
Best Answer
To make sure everything will work you will have to
do that.

1 person thinks this is helpful.
17,945
Andrew about a year ago
Best Answer
It's all the same. If it's a 350 go ahead and take the
computer so it's programmed for one.

1 person thinks this is helpful.
1,515
James about a year ago
Best Answer
All Chevy bolt patterns are the same. Different
engines & transmitions bolt togeather, & most use
the same motor mounts too. Use everything that
goes with 97' engine too. 350 for a 305 is a good
choice.


1 person thinks this is helpful.
22,635
Kelly about a year ago
Best Answer
5.0 and 5.7 used the same ECM The 5.0 pcm will
not lean out the 5.7 engine at all. the 02 sensors
will correct the fuel mixture and you will not have
any trouble with running what you have already.
The only reasone you would need to make any
mods to the pcm or the wire harnss would be if you
where going from a 4.3 to a 5.7.

1 person thinks this is helpful.
17,945
Andrew about a year ago
Best Answer
Your telling me a pcm programmed to an engine
flowing 305 ci worth of displacement that uses a
MAF sensor isn't going to tell a difference in
another 45 ci of displacement? The maf reading
alone will be different, the fuel trim tables will be
too lean. It will run, no doubt about that but it won't
be right.

1 person thinks this is helpful.
22,635
Kelly about a year ago
Best Answer
yep. gm says there both in the same
parametersFYI... several GM trucks use the same
16197427 ECM for 5.0 and 5.7 just change out the
chip if you want.. CHEVROLET ASTRO (1994 -
1995) CHEVROLET BLAZER (1994 - 1995)
CHEVROLET C1500 PICKUP (1994 - 1995)
CHEVROLET C2500 PICKUP (1994 - 1995)
CHEVROLET C2500 SUBURBAN (1994 - 1995)
CHEVROLET C3500 PICKUP (1994 - 1995)
CHEVROLET EXPRESS 1500 1996 CHEVROLET
EXPRESS 2500 1996 CHEVROLET G10 (1994
- 1995) CHEVROLET G20 (1994 - 1995)
CHEVROLET G30 (1994 - 1996) CHEVROLET
K1500 PICKUP (1994 - 1995) CHEVROLET
K1500 SUBURBAN 1995 CHEVROLET
K2500 PICKUP (1994 - 1995) CHEVROLET
K3500 PICKUP (1994 - 1995) CHEVROLET
P30 (1995 - 1997) CHEVROLET S10 BLAZER
(1993 - 1994) CHEVROLET S10 PICKUP (1993
- 1995) CHEVROLET TAHOE 1995 GMC
C1500 PICKUP (1994 - 1995) GMC C1500
SUBURBAN (1994 - 1995) GMC C2500 PICKUP
(1994 - 1995) GMC C2500 SUBURBAN (1994 -
1995) GMC C3500 PICKUP (1994 - 1995) GMC
G1500 (1994 - 1995) GMC G2500 (1994 -
1995) GMC G3500 (1994 - 1996) GMC
JIMMY (1993 - 1995) GMC K1500 PICKUP
(1994 - 1995) GMC K2500 PICKUP (1994 -
1995) GMC K2500 SUBURBAN (1994 - 1995)
GMC K3500 (1994 - 1995) GMC P3500 (1995
- 1997) GMC SAFARI (1994 - 1995) GMC
SONOMA (1993 - 1995) GMC YUKON (1994
- 1995).

10
454EDDIE 6 months ago
Best Answer
Can I put a 1995 Tahoe motor in my 1990chevy
k1500?

1 person thinks this is helpful.
17,945
Andrew 6 months ago
Best Answer
Yes

10
454EDDIE 6 months ago
Best Answer
Is the wiring harness the?

17,945
Andrew 6 months ago
Best Answer
Yes, as long as they are the same engine size you'll
be good. Going v6 to v8 would be alittle more
involved. And switching from a 305 to 350 will be
plug and play but I would advise the appropriate
pcm to go with the motor

Muddyblazer about a week ago
Best Answer
I've got a brand new 2000 350 long block what do I
need to do to make it work in my1993 truck
I just bought a 98 chevy silverado 1500 305 5.0
liter v8 vortec that had a lower end knock so i
bought a 96 gmc with a 350 5.7 liter v8 vortec for
the motor. The swap went good and everything
bolted up and plugged in without any problems.
After i got everything bolted down, plugged in and
fluids in it, it started no problem. After driving it a
week now, i believe the pcm has not learned the
difference from the 305 to the 350. I hear it
backfiring when im coasting and the motor cuts
out and picks right back up randomly while driving.
Im looking into having my pcm reprogrammed
locally or putting the prom chip from the pcm in
the 96 sierra in the pcm thats in the 98 and already
programmed to my vin. Will this actually work and
if so do i need to do the crank variation relearn or
any other modification or tuning to make it work?

2 Answers

74,755

So, what is the question you are asking?

1 of 1 people found this helpful.

Will an early 80's 305 work in a 94 Chevy pickup

Your Answer

Chevrolet C/K 1500 Experts

  • #1
    Andrew Olsen
    Reputation
    3,720
  • #2
    John Saffrahn
    Reputation
    2,600
  • #3
    Rowefast
    Reputation
    2,200
View All

Related Models For Sale

Used Chevrolet Silverado 1500
182 Great Deals out of 10,637 listings starting at $399
Used GMC Sierra 1500
252 Great Deals out of 10,629 listings starting at $1,775
Used Ford F-150
531 Great Deals out of 10,064 listings starting at $1,800
Used Dodge Ram 1500
45 Great Deals out of 520 listings starting at $2,997
Used Chevrolet Tahoe
4 Great Deals out of 739 listings starting at $6,935
Used Chevrolet Camaro
3 Great Deals out of 838 listings starting at $12,907
Used Chevrolet S-10
11 listings starting at $5,950
Used Toyota Tacoma
39 Great Deals out of 1,006 listings starting at $5,850

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.