Putting it bk on its stock LIFT owner lowered it want normal again and muffler\exguast

Asked by Dec 30, 2015 at 01:32 AM about the 2000 Chevrolet S-10

Question type: Maintenance & Repair

I have a 2000 Chevy s10  2wd well I just bought it
well they failed to tell me I found out when I was  
checkn it out now this is the way I  can best explain
please asking for help  maybe I can do it   well the
ppl I bought it from  said a Spanish guy owned it
well he lowered it I look under and muffler\exguast  
goes no further passed  the middle its post to lead
all the way bk but it looks like it has  marks like
someone  fucked up the muffler only goes mid way
then tied  with wire to hold it up at end  how do I fix
it as u can see I don't know much but would like an
oppioion please on fixn it and do I need whole kit
....and another thing he lowered it how do I go
about on making it bk to normal like stock the way
Chevy built it to be I don't like it lowered want bk to
normal

4 Answers

66,065

Please don't use profanity. You can get your thoughts across without it. Sounds like you'll have to replace the exhaust system. Complete with the hangers. That's really no big deal. If you have to replace the catalytic converter be sure you check the emissions decal under the hood and see if you have Federal Emissions or California Emissions. With the converter it makes a difference. As far as it being lowered I'm not sure what's involved to put it back to original. Perhaps someone else can chime in on that part? HTH. -Jim

1 of 1 people found this helpful.
20,325

you might be better off to ask a muffler shop who bends and builds exhaust systems ,preferably not the big chain shops ,they can see what can be saved and add to it. they'll also see what lowering maneuvering was done,

1 of 1 people found this helpful.
237,625

The lowering part might require you to pick up some new or used stock springs and other suspension components.

1 of 1 people found this helpful.
18,275

You have to see how they lowered it first. Typically people use blocks in the rear and all you would have to do is remove them to make the back normal. The front will either use a coil or spindle to lower it, you would have to replace which ever one they used to stock. As far as the exhaust, take it to a muffler shop.

1 of 1 people found this helpful.

Your Answer

Add photo
S-10

Looking for a Used S-10 in your area?

CarGurus has 11 nationwide S-10 listings starting at $1,195.

Postal Code:

Search Chevrolet S-10 Questions

Chevrolet S-10 Experts

#1 Andrew Olsen
Andrew Olsen
Reputation 2,300
#2 John Saffrahn
John Saffrahn
Reputation 970
#3 Trebor66
Trebor66
Reputation 960
View All

Related Models For Sale

Used Ford Ranger
47 Great Deals out of 279 listings starting at $2,950
Used Chevrolet Silverado 1500
102 Great Deals out of 6,032 listings starting at $2,339
Used GMC Sonoma
5 listings starting at $3,995
Used Toyota Tacoma
16 Great Deals out of 765 listings starting at $4,950
Used Ford F-150
298 Great Deals out of 8,122 listings starting at $2,499
Used Dodge Dakota
17 Great Deals out of 151 listings starting at $1,995
Used Nissan Frontier
4 Great Deals out of 323 listings starting at $4,300
Used GMC Sierra 1500
146 Great Deals out of 7,539 listings starting at $3,950
Used Chevrolet Blazer
16 listings starting at $1,789
Used Dodge Ram 1500
52 Great Deals out of 478 listings starting at $2,500
Used Chevrolet Camaro
984 listings starting at $13,999
Used Ford Mustang
1,334 listings starting at $5,980

Used Cars For Sale

2002 Chevrolet S-10 For Sale
1 listings starting at $1,195

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.