Hello, The factory-installed clutch disc is 9". A replacement disc can be 8.86" (sold as 225 mm) I hope this helps! CarGrrl
8-7/8" http://www.centerforce.com/clutches.tpl?cart=1187732649485890&subsection=clutchselector&searchStr=csearchStr3&cstep1=step1&cstep2=step2&cstep3=step3&carmake=FORD%20LIGHT%20TRUCK%2C%20SUV%20%26%20VAN&carmodel=BRONCO%20II&caryear=1989
2.9 liter 5 speed 4x4 what size is the clutch
1989 Ford Bronco II
-
Maintenance & Repair
86 Bronco II 5 speed trans. when you push in clutch to shift gears it is normal, but when releasing the clutch there is a rattle or clattering. I don't think there is anything wrong with the throw-o...
1986 Ford Bronco II XLT 4WD
-
Maintenance & Repair
My brother has an 88 bronco 2 that will not start when you turn the key. He has replaced the starter solenoid and the fuel pump turns on but when he turns the key it wont even crank.
1988 Ford Bronco II XLT 4WD
-
Maintenance & Repair
Clutch doesn't contact till almost to the top. Has a new clutch in it
1989 Ford Bronco II XL
-
Maintenance & Repair
How does a person bleed the hydraulic clutch slave unit Once the clutch slave bleeder valve is located?
1986 Ford Bronco II STD 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.