How to fix error code P1000 for Ford F-150 with engine 4.6L of year 2006
Error codes: 4.6L
Knowledge level: I know little about cars
Help needed: Please help me find out what is going on and how to fix it.
P1000 FORD - On Board Diagnostic System Readiness Test Not Complete - Possible causes - The vehicle is new from the factory. - Battery or Powertrain Control Module (PCM) had recently been disconnected. - An OBD monitor failure occurred before completion of an OBD drive cycle. - PCM Detected Trouble Codes (DTC) have recently been cleared with a scan tool. - This code just means that the PCM didn't complete a full diagnose cycle, and is set when the battery have been disconnected, codes have been cleared or sometimes even when the vehicle have been towed. No scanner it's necessary to clear the code, driving the vehicle for a few minutes (sometimes more) to complete the diagnose cycle will clear the code. Clearing the code will reset the light unless other codes present.
There is an another issue going on not just this code '1000. Clear the KAM and start the vehicle re scan.
Bottom line, it hasn't completed scanning all the sensors, just drive it for a couple days and it'll gi away
Thank you for your answer !!!
Looking for a Used F-150 in your area?
CarGurus has 7,072 nationwide F-150 listings starting at $426.
Search Ford F-150 Questions
Ford F-150 Experts